How to use the GHOST MV1

Information and directions on how to use the GHOST MV1

How do I open the latch?
The release latch is designed so that instead of a direct push down, you need to slide your thumb towards the right (in the direction away from the door), w...
Fri, 19 Jul, 2019 at 3:55 PM
How do I load the GHOST MV1?
Slide latch release to open door, remove crucible and load with material (if using concentrates, insert pad first). For dry herb, grind to a coarse consiste...
Fri, 1 Jun, 2018 at 4:04 PM
How Do I Turn MV1 On & Put in Vape Mode?
Your MV1 arrives in Shipping Mode and is preset for use with dry herbs. To activate the unit, press and hold the Mode Button until a single green LED shows,...
Wed, 17 Jul, 2019 at 4:49 PM
How do I change the temperature on the GHOST MV1?
Press and hold the Mode Button to display battery level. Release then press and hold again to display current heat setting, indicated by flashing LED...
Fri, 9 Aug, 2019 at 8:09 AM
Recommended Mode Sequence (Herb)
The MV1 was designed to deliver both the full flavor of your material and a potent hit. The following sequence is predicated on providing this experien...
Thu, 25 Jul, 2019 at 11:53 AM
MV1: Vaping Dry Herb (Setup)
1.) Make sure you're using one of the 5 Herb Settings (see legend above) 2.) For the best experience, take 10-second draws 3.) It's not a r...
Thu, 17 Oct, 2019 at 8:45 AM
MV1: Vaping Concentrates (Setup)
* There is only one mode for Concentrates (see legend above) * A typical session with concentrates is comprised of 8-10 draws (first 2 draws are typic...
Thu, 17 Oct, 2019 at 8:48 AM
When Do I Take My Draw?
Since Herb Mode is different from Concentrate Mode I'll break this down into two sections HERB MODE Before you continue, please see our introducto...
Wed, 7 Aug, 2019 at 11:55 AM
What's the Best Way to Hit the MV1?
The best way to hit the MV1 is a variation of the "diaphragmatic breathing" technique. While diaphragmatic breathing involves inhaling through you...
Thu, 25 Jul, 2019 at 12:47 PM
What Are the Default Temps for the MV1?
The default temps are as follows  * The higher the heat setting, the more heat that's created, resulting in more vapor. The higher in heat you...
Thu, 25 Jul, 2019 at 12:08 PM