The technique of hitting an on-demand vape is different from hitting a session vape, joint, bong or piece. Before you proceed, please see our introductory article here >>> MV1: Vaping Dry Herb (best practice)

If you're following the recommendations detailed in our introductory article and you're still not getting desired results, please see the following: 

Main Causes of Low Vapor Production

1.) Blocked air pathways (clean your MV1)

  • Check these areas especially; these air pathways can get gummed up even after 1-2 session 

2.) Crucible is packed too tight 

3.) Low battery (charge your battery)

4.) Moist herb (let your herb dry out on a piece of paper for at least 10-15mins.)

5.) Not drawing long or hard enough/Not drawing when you're supposed to (When Do I Take My Draw?)

6.) Air bypass (reassemble your heat sink)

7.) Wrong heat setting selected (see legend here)

8) You have the old design heat sink (see here)

9.) Improper inhale technique (see our recommendation) 

For more support on this issue, please submit a trouble ticket here >>> Create New Support Request